High-pressure cleaning generally uses flat fan-shaped nozzles with a small angle. In theory, the smaller the spray angle of the flat fan-shaped nozzle with the same flow rate, the stronger the impact generated. Therefore, for high-pressure cleaning nozzles, we generally recommend using 30 degrees- For nozzles with a spray angle between 50 degrees, the flow rate of the nozzle needs to be determined according to your pump, because if the flow rate of the nozzle is greater than the rated flow rate of the high-pressure cleaner, pressure loss will occur.

The choice of material for the nozzle of the high-pressure cleaner is very important. Because the high-pressure cleaner can generate high pressure, which will accelerate the wear of the nozzle, for the nozzle of the high-pressure cleaner, we use HSS material, which has a higher hardness than ordinary stainless steel, which is effective. Reduce nozzle wear and extend nozzle life.