site logo

Atomizing nozzle spray system

If you want to spray the liquid in the form of a mist, there are many ways to achieve it.

1.Centrifugal jet.The working principle of this atomizer is to throw out the liquid through a high-speed rotating centrifugal disk, break it into fine droplets and then blow it in a certain direction by airflow.

2.High-frequency vibration.The working principle of this atomizer is to use high-frequency vibration to break the liquid into fine particles, and then blow it in a certain direction through a fan.

3. High-pressure nozzle type. The working principle of this atomizer is to use a high-pressure water pump to pressurize the liquid to a higher pressure, and then spray it out through an atomizing nozzle. Accelerate the rotation of the water stream, so that when the liquid leaves the nozzle, it collides with the surrounding static air, breaking the liquid into fine particles and spraying them out. Or an impact module is created on the nozzle jet path, and the high-speed water stream collides with the impact module violently, thus Crush the liquid.

4. Air atomized spray system, this atomizer uses compressed air to fully mix with water, and then sprays at high speed, and violently collides with the surrounding static air, thereby crushing the liquid and forming droplets with small particle size.

Each atomization system has different application scenarios, you can choose according to your actual use scenarios, or you can contact us, our engineers will recommend the most suitable spray solution for you.