The automatic air atomizing nozzle is a complete system. To realize the automatic spraying of the air atomizing nozzle, you first need an automatic control system, sensors, and an air atomizing nozzle that can realize automatic spraying.

For example, if we want to install an automatic spray cooling device in an outdoor square, we need a temperature sensor, a control system, and an automatic air atomization nozzle. The temperature sensor collects temperature data and sends it to the control system, and the control system analyzes the temperature data. When the value is greater than the set value At temperature, the control system sends a signal to start spraying to the actuator (water pump, solenoid valve, etc.), the actuator sends liquid and gas into the nozzle, and the nozzle starts spraying. When the system detects that the current temperature is lower than the set value, control The system will send a signal to stop spraying to the actuator, and the nozzle will stop spraying.

The automatic air atomizing nozzle we designed and manufactured is equipped with such an actuator (solenoid valve or cylinder, etc.).The actuator pushes the valve needle to block or open the nozzle of the nozzle to stop spraying or start spraying.

Installing the actuator inside the nozzle greatly increases the usage scenarios of the nozzle and better cooperates with the automation system to realize the manufacturing method of an unmanned factory.